To remove the hub center caps of a Tesla Model Y, you can follow these steps:
Locate the hub center cover: The wheel center caps is the emblem or cover in the middle of the wheel.
Find the access point: Look for a small nick or gap on the outer edge of the center caps.
This is usually located around the circumference of the lid.
Install slotted tool: Use a flathead screwdriver, plastic pry bar, or frame release tool to install on the access point.
Apply light pressure: Carefully lift the tool onto the center cover while applying light pressure.
Be careful not to scratch or damage the wheel or cover.
Removing the middle caps: When the tool is inserted and pressed in, the middle cover will begin to loosen.
Continue to press and pry gently until the lid pops off.
Removing the middle cover: After partially or completely removing the middle cover, you can remove it carefully by hand.
Be careful not to drop or lose small pieces of the lid.
Repeat for other center caps: If you need to remove the center cover from other wheels, repeat the same procedure for each wheel.
Please note that the specific center cover removal method may vary slightly depending on the Tesla Model Y year and the specific wheel design.
You should consult your vehicle owner's manual or contact Tesla customer support for any model-specific instructions or precautions.
